CRT-P Series
Carbide Roll Taps for through hole
● Features
This tap is suitable for massproduction of high quality internal threads.
Also, it is suitable for aluminum alloys, magnesium alloys and copper alloys. It is made of Ultra Micro Alloy Carbide.
Type of thread | Ic 4P | Tap Limit | L | I | ln | d | Kl | K | 凸 | F |
---|---|---|---|---|---|---|---|---|---|---|
M3 × 0.5 | 41101 | EG5 | 46 | 10 | 18 | 4 | 6 | 3.2 | 4 | 4 |
M4 × 0.7 | 41102 | EG6 | 52 | 10 | 20 | 5 | 7 | 4 | 4 | 4 |
M5 × 0.8 | 41103 | EG6 | 60 | 10 | 22 | 5.5 | 7 | 4.5 | 4 | 4 |
M6 × 1.0 | 41104 | EG7 | 62 | 10 | 24 | 6 | 7 | 4.5 | 4 | 4 |
M8 × 1.25 | 41105 | EG7 | 70 | 18 | - | 6.2 | 8 | 5 | 4 | 4 |
M10 × 1. 5 | 41106 | EG7 | 75 | 19 | - | 7 | 8 | 5.5 | 6 | 6 |
M10 × 1. 25 | 41107 | EG7 | 75 | 19 | - | 7 | 8 | 5.5 | 6 | 6 |
M12 × 1.75 | 41108 | EG8 | 82 | 23 | - | 8.5 | 9 | 6.5 | 6 | 6 |
M12 × 1. 5 | 41109 | EG7 | 82 | 23 | - | 8.5 | 9 | 6.5 | 6 | 6 |
M10 × 1. 25 | 41110 | EG7 | 82 | 23 | - | 8.5 | 9 | 6.5 | 6 | 6 |