CHT-50 Series
Carbide Hand Taps for Hardened Steels
● Features
This Tap is specially designed for tapping hardened steels with hardness from 45 to 55 HRC.
| Type of thread | Ic 2.5P | Ic 5P | Tap Limit | L | I | d | KI | K | F |
|---|---|---|---|---|---|---|---|---|---|
| M3 × 0.5 | 13001 | 13101 | EL3 | 46 | 11 | 4 | 6 | 3.2 | 4 |
| M4 × 0.7 | 13002 | 13102 | EL3 | 52 | 13 | 5 | 7 | 4 | 4 |
| M5 × 0.8 | 13003 | 13103 | EL3 | 60 | 16 | 5.5 | 7 | 4.5 | 4 |
| M6 × 1.0 | 13004 | 13104 | EL3 | 62 | 19 | 6 | 7 | 4.5 | 4 |
| M8 × 1.25 | 13005 | 13105 | EL3 | 70 | 22 | 6.2 | 8 | 5 | 5 |
| M10 × 1.5 | 13006 | 13106 | EL3 | 75 | 24 | 7 | 8 | 5.5 | 5 |
| M10 × 1.25 | 13007 | 13107 | EL3 | 75 | 20 | 7 | 8 | 5.5 | 5 |
| M12 × 1.75 | 13008 | 13108 | EL3 | 82 | 29 | 8.5 | 9 | 6.5 | 5 |
| M12 × 1.5 | 13009 | 13109 | EL3 | 82 | 29 | 8.5 | 9 | 6.5 | 5 |
| M12 × 1.25 | 13010 | 13110 | EL3 | 82 | 29 | 8.5 | 9 | 6.5 | 5 |
