IJ Series
Electroplated tool Hyper-electroplated diamond tool for Profile Machining
- ※Photo is the image of the 10H processed volume using a φ20 roughening tool.
Advanced electroplating technologies cultivated over many years were used to create this highly efficient, long-life electroplated diamond tool
High-speed cutting improves efficiency!
By increasing the number of cuts per pass and the feed speed, processing efficiency was raised to 2 to 5 times levels for conventional electroplated tools.（ EISEN comparisons)
Longer life helps reduce tool cost!
- Tool life is 2 to 3 times longer compared to conventional electroplated tools. (EISEN comparisons)
Dimensions
Processing Examples: Processing Conditions (EISEN test data)
- ※ Durability of the equipment has not been confirmed.
IJR Series
| Product Number |
Diameter
φD |
Electroplating length T |
Total Length L |
Shank Diameter φY |
Granularity Diamond |
|---|---|---|---|---|---|
| IJR-6.0 | 6.0 | 5 | 60 | 6.0 | #80 |
| IJR-8.0 | 8.0 | 5 | 60 | 8.0 | |
| IJR-10.0 | 10.0 | 10 | 60 | 10.0 | |
| IJR-12.0 | 12.0 | 10 | 70 | 12.0 | |
| IJR-16.0 | 16.0 | 15 | 70 | 16.0 | |
| IJR-20.0 | 20.0 | 20 | 70 | 20.0 | |
| IJR-25.0 | 25.0 | 20 | 80 | 25.0 | |
| IJR-32.0 | 32.0 | 20 | 100 | 32.0 |
IJF Series
| Product Number |
Diameter
φD |
Electroplating length T |
Total Length L |
Shank Diameter φY |
Granularity Diamond |
|---|---|---|---|---|---|
| IJF-6.0 | 6.0 | 5 | 60 | 6.0 | #170 |
| IJF-8.0 | 8.0 | 5 | 60 | 8.0 | |
| IJF-10.0 | 10.0 | 10 | 60 | 10.0 | |
| IJF-12.0 | 12.0 | 10 | 70 | 12.0 | |
| IJF-16.0 | 16.0 | 15 | 70 | 16.0 | |
| IJF-20.0 | 20.0 | 20 | 70 | 20.0 | |
| IJF-25.0 | 25.0 | 20 | 80 | 25.0 | |
| IJF-32.0 | 32.0 | 20 | 100 | 32.0 |