IK Series
Tools for processing tungsten carbides and die steel Diesack Drill Straight groove type
Tool for drilling holes into tungsten carbide.
Stable processing with high rigidity made possible by a straight groove configuration based on an original EISEN design. Simple design for more cost-efficient use.
Product Number | Product Name |
Diameter
φD |
Electroplating length T |
Groove length L1 |
Length beneath head L2 |
Total Length L |
Shank Diameter φY |
Granularity Diamond |
---|---|---|---|---|---|---|---|---|
IKD-1.4 | Drill for M2 rough holes | 1.4 | 3 | 11 | 12 | 45 | 3.0 | #200 |
IKD-1.85 | Drill for M2.5 rough holes | 1.85 | 3 | 11 | 12 | 45 | 3.0 | #140 |
IKD-1.95 | Drill for M2.6 rough holes | 1.95 | 3 | 11 | 12 | 45 | 3.0 | #140 |
IKD-2.3 | Drill for M3 rough holes | 2.3 | 3 | 13 | 14 | 45 | 3.0 | #120 |
IKD-3.1 | Drill for M4 rough holes | 3.1 | 3 | 18 | 19 | 50 | 4.0 | #80 |
IKD-4.0 | Drill for M5 rough holes | 4.0 | 5 | 20 | 21 | 55 | 4.0 | #80 |
IKD-4.8 | Drill for M6 rough holes | 4.8 | 5 | 25 | 26 | 70 | 6.0 | #80 |
IKD-6.55 | Drill for M8 rough holes | 6.55 | 5 | 34 | 35 | 75 | 8.0 | #80 |
IKD-8.3 | Drill for M10 rough holes | 8.3 | 7 | 37 | 38 | 85 | 10.0 | #80 |